Location
Home / Phil and Teds / Tyre and Inner Tube Set for Phil & Teds - with Slime Protection

Tyre and Inner Tube Set for Phil & Teds - with Slime Protection

Tyre and Inner Tube Set for Phil & Teds - with Slime Protection
Protect against punctures with this set of tyres and inner tubes. The inner tubes are filled with Genuine Slime Tube Sealant which seeks out and instantly seals punctures in your tubes,  working continuously for up to 2 years. Perfect for pushchairs, prams, strollers, buggies...
Suitable for Phil and Teds Sport, Dash, Classic, Navigator, Explorer, E3...
Set includes:
3 Tyres:
  • Size: 12½ x 1.75 x 2¼ (47-203)
  • Tread Pattern: Easy Rolling
  • Colour: Black
3 Inner Tubes
  • The Slime filled inner tubes have angled valves for easy inflating. 
    ×

    Valves Explained

    Bent Valve Bent Valve

    An angled (bent) valve sticks out from the side of the wheel and makes it easier to inflate the tyre. It can be inflated the same as a normal bicycle valve. The angle of the valve can vary from 45° to 90° depending on the manufacturer.

    Straight Valve

    A straight valve does not stick out from the side of the wheel so make sure there is enough room for you to attach your pump. It can be inflated the same as a normal bicycle valve.

Fitting Instructions
  • Useful tips and advice on fitting tyres and inner tubes
Additional Information:
Slime Tube Sealant is a specially formulated liquid which is injected into the inner tube through the valve.  It prevents and repairs flat tyres caused by sharp objects up to 3mm in diameter. Slime Tube Sealant works repeatedly for up to 2 years.  When a puncture occurs the Sealant moves into the hole and the clotting agents are activated, effectively filling the hole and blocking the loss of air.

Slime Tube Sealant
  • Instantly seals up to 1/8" (3mm) punctures for up to two years
  • Non-toxic and non-hazardous
  • Non-flammable
  • Environmentally friendly and cleans up with water
  • Effective under the most extreme temperatures: Low freezing point of -35˚F (-37˚C) and a high separation point of 182˚F (82˚C)
  • Uses Fibro-Seal technology
If you purchase Slime filled inner tubes from us the Slime will already be inside the inner tubes when you receive them. They can be fitted the same as a standard inner tube.
Bent Valve

An angled (bent) valve sticks out from the side of the wheel and makes it easier to inflate the tyre. It can be inflated the same as a normal bicycle valve. The angle of the valve can vary from 45° to 90° depending on the manufacturer.

Straight Valve

A straight valve does not stick out from the side of the wheel so make sure there is enough room for you to attach your pump. It can be inflated the same as a normal bicycle valve.

Tyre Levers  

Tyre Levers are needed to remove your existing tyres.
The levers we sell are made of hard wearing nylon which will not damage your wheels.



Pump  

A Pump is needed to inflate your tyres during fitting and to keep them inflated for improved performance and longer life.

A selection of Tyre Levers and Pumps can be found in the "Related Products" below this listing.
delivery van
Delivery Charges (UK Only)

  • Express Delivery - 1-3 business days
    £2.95 on all orders
  • Standard Delivery - 2-5 business days
    FREE on orders over £40
  • Standard Delivery - 2-5 business days
    £1.95 on orders under £40

Applies to orders placed before 2pm Monday to Friday.
All available delivery options will be shown during checkout.

Delivery Times

Royal Mail Service Updates

Price:
£39.95
Stock Info:
In Stock
Your Total:
Quantity:
Delivery Times

Related Products

PramTyres
Your Cart
Your Cart: Empty
Search
PramCat
© 2024 PramTyres, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2024 Kryptronic, Inc. Exec Time: 0.061233 Seconds Memory Usage: 2.374222 Megabytes
Kryptronic